tailstock造句
1. Part mapping and assembly drawings of a tailstock center.
2. Model SPK 36 B series NC rotary tailstock is one of the accessories for the NC rotary table.
3. The checking model for the rigidity of the tailstock is setup and the result is obtained.
3.try its best to gather and create good sentences.
4. Tailstock. Compared to the headstock, it seems simple. The back seat has nothing special. The vent-pipe told me: this is a motor bike.
5. The application examples of KBE in cam and tailstock design were given.
6. The short tailstock and the sectional rear light also command looks like the movement.
7. The paper introduces the construction of the tailstock and the machining process of the bore.
8. The tailstock should be complete bikes's luminescent spot, the prominent bumper is backward full, but the red set of white rear light is the tailstock most appealing part.
9. Gear case of The gearing system and the gliding tailstock are integrative structure, lifting swiftly, operating easily.
10. Calculation method is decided and formula is selected for the spring of the tailstock.
11. The others end of the workpiece is supported by the tailstock.
12. The hole you see is the sprue hole for the tailstock, the pulley's sprue is not visible in the picture.
13. The middle group of castings are the parts for the Gingery dividing head and tailstock.
14. The four guide way design allows collision - free traverse movement of the tailstock.
15. The horizontal bed is the foundation member which supports the headstock , tailstock, and carriage.