快好知 kuaihz


serration造句
1. Moreover, intergranular corrosion on the serration surface is other reason to induce GH2036 turbine disc to early fail under the high-temperature combustion condition. 2. The points for attention in designing the serration axle are pointed out. 3. As the rise of the strain rate, the feature of the true stress- true strain curve changed from "flat" to "serration", and the thermal deformation softening feature was reinforced. 4. We adopt serration design in order for thermolysis and life. 5. The results show that high stress in serration and its arc transition region, and observed that severe stress concentration in these locations. 6. The optimization rule on the layout and serration of the compact range was referred to, then the optimization algorithm was performed and the result was given. 7. The full text used the methods of combining literature and the literature, and make serration research as a whole for Li zhi. 8. Unless otherwise specified, the nozzle gasket surface shall be flat smooth surface and serration specified in ANSI standard is not to provide. 9. It is difficult to grind bore on gear and secure its precision. Especially more linkage gear's precision can not be secured easily, so it maybe become a waste product because of serration error. 10. The new method for designing Fresnel lens has a wide serration breadth and unequal pitch. 11. Using the wrong combination will result in a bad connection between crankset and bottom bracket and may lead to a damaged serration of your crankset. 12. Cut the edge of the card by pinking shears to make serration or wave patterns. 13. Post processing method is put forward in order to removal serration of spectral curve after calibration.