快好知 kuaihz


GND造句
1. This new additive have advantage with a gnd effect of filtrate las reduction, easy adjusting thickening time, good rheological property, low water abeorption rate and suit for large temperature range. 2. In addition, to obtain the designed resolution distance, gnd lighting and good contrast are necessary. 3. For best performance, do not connect to GND directly at the part. 4. GND computing is an important new technology. Database System is needed for managing a large number of data on the grid. 5. GND:ground, the input signal is switched off and the attenuator is short to ground. 6. Topics on aerodrome control at clearance delivery (DEL) and ground control (GND) level). S1 controllers must be enrolled in this course before promoting to S2. 7. A transistor is grounded not connected to GND without connection, thereby simplifying the replacement of data in the memory cell. 8. EN enable control: when it connect to GND, the motor running; otherwise, the motor is stop. 9. Device ground pins. All GND pins should be connected to the board GND plane. 10. Note that as long as the external power supply is active, the GND pin may not be floating. 11. Replaced nose gear shock strut charging valve, no leakage in GND check. 12. Note: If the electromagnetic disturbance around is strong, suggest make proper ground to screened cable, the ground position should be placed at the GND point of input terminal of receiving equipment. 13. To enable 27 address combinations, this temperature sensor provides three dedicated address pins that can be placed in one of three states: tied to GND, tied to VDD, or left floating. 14. The uncommitted op amp has its noninverting input connected to the GND pin. 15. The power rating is based on a printed circuit board heat spreading capability equivalent to 2 square inches of copper connected to the GND pins. 16. The simulation calculating results show, the model is in agreement with field experience and can give a gnd explanation of a field accident which is difficult to explain by EGM. 17. CONNECT A JUMPER BETWEEN THE BATTERY TEMP SENSOR SIGNAL AND SENSOR GND CKTS. 18. The results obtained in this paper offer a simple and effective approach to the analysis and design of stable control systems, and therefore have gnd theoretical significance. 19. This text presents that 8098 single chip processor's automatic judgement Logging at a certain time. timely cyclic monitoring's method and postulate, in monitor direct current bus is gnd or not. 20. Seven test points enable a check of the output voltages and currents, by supplying proportional voltages relative to GND.