stiffness造句
121 The bifurcation behavior of the coupled nonlinear normal mode is associated with detuning parameter and mode amplitude, but not with the nonlinear stiffness of uncoupling spring.
122 The stiffness does not change with the linear displacement. Instead, It is a constant and is not linear with its directional accuracy providing the displacement is microscale.
123 In this paper the stiffness and strength of the runner blades for a Kaplan turbine are calculated with finite element method using ANSYS sofware.
124 The natural frequency of horizontal vibration increase with the guide wheel stiffness " increasing. "
125 The formation of different stiffness or viscoelasticity area was very important to the changes of cell shape during cytokinesis .
126 Conventional aerostatic bearings have the problems of vibrations and motion inaccuracy due to the low stiffness.
127 The dynamical equations of rigid flexible coupling multibody systems have characters of stiffness and frequency oscillation.
128 Objective To test the biomechanical stiffness of cross-linkage in monosegment instrument with short pedicle screw.
129 The structural strength and global stiffness of the composite penstock are discussed in detail.
130 Appearance performances include drape pendency, stiffness and crease recovering, etc.
131 Threshold rattling speed not only depends upon the frequency and amplitude of the errors of a gear pair, but also time-varying meshing stiffness and their combination frequency.
132 With a base current of 0.2 A in the coils, high bearing stiffness was obtained when single side working mode of AMBs was achieved.
133 Angular stiffness and elastomer shear strain on maximum swinging angle are important indexes in flexible joint design of solid rocket motor.
134 Multistory frames with semi - rigid connections of different initial stiffness are constructed together with rigid frame.
135 Formerly the FEM perturbation method is to make the same small varieties of mass matrix and stiffness matrix, then calculate changes of system's eigenvalue and eigen vector.
136 Returnability is affected mainly by automobile velocity, torsional stiffness of steering system and caster angle and relatively little by viscous friction coefficient of steering system.
137 Bolted end-plate connection is one of the main connection for the steel structures, which is with high resistance ability, large stiffness, and convenient for construction.
138 Stiffness, as defined previously in this chapter (Eq. 9.3), is expected to be dependent on both the asphalt cement and the concentration and geometric properties of the aggregate.
139 Then, the generalized stiffness matrix and load vector in the equilibrium equations are formulated by using the virtual work principle, and the numerical integration method is discussed.
140 The kinematical analysis was made to demonstrate the feasible of the prototype, and the force analysis indicates that the system has sufficient strength and stiffness.
141 According to Hertzian stress, the stiffness during the contact of a pair of gear teeth is derived, and the variation of stiffness is introduced into the rack-and-pinion meshing model.
142 The plate's thickness and stiffness relative to its peculiarities, especially the soundboard, are crucial.
143 The methods of establishing ring bonds finite element model-detailed model and equivalent stiffness model are elaborated in order to research the effect of systems with adhesive.
144 Stiffness, ultimate and yield forces ( torques ) were compared using an analysis of variance.
145 The complex modal analysis method is generalized to the cases in which stiffness matrix may be singular and mass matrix, damping matrix and stiffness may be nonsymmetric.
146 Secondly, the relation between longitudinal wave propagation velocity and resin-bonded stiffness of full length anchoring bolt is simulated.
147 It is shown that the offset of propulsion force and the lower natural fundamental frequency are caused by asymmetry of turbopump and weakness of connection stiffness between propulsion and frame.
148 At the same time, estimated the main factors that influence to image stabilization precision such as stiffness of the major components, mechanical resonance frequency, the gyroscope noise, and so on.
149 In this paper, based on the behaviour of a curved beam, the change of the stiffness of restrained steel beams is studied.
150 Rotate the blocker door and the blocker door links for signs of excessive stiffness or wear through full range of motion.
12345678910