快好知 kuaihz


quadrilateral造句
(31) The new Quadrilateral Area Coordinate (QAC) method is a powerful tool to construct 2D finite element models. (32) Secondly, the quadrilateral area coordinate is adopted instead of isoparametric coordinate, so that the element can keep high accuracy for different meshes of distortion. (33) An alternative decompositionmethod is to split the quadrilateral into triangles that are closest to equalin size. (34) Eight - nodded curvilinear quadrilateral isoparametric shell element is used both in the FEM and in the BEM. (35) The surface of propeller and its trailing vortex is divided into a number of small hyperboloidal quadrilateral panels with constant source sink and doublet distributions. (36) Then some smoothing operations are taken to refine the initial quadrilateral meshes. (37) Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented. (38) It was also shown that both accuracy and convergence could be ensured by 4 - node quadrilateral element. (39) In this paper, the third version of area coordinate systems for quadrilateral elements (QAC-III) with two coordinate components (T1, T2) is systematically established. (40) In this paper, a new quadrilateral thin-thick plate bending element with only 12 degrees of freedom, TACQ, is developed by using the area coordinate method. (41) Since OpenGL does not specify its decompositionalgorithm, different implementations may decompose a given quadrilateral alongdifferent diagonals. (42) A new generalized conforming isoparametric element is formulated to arbitrary irregular quadrilateral for plane stress analysis. (43) An analytical trial function method (ATF) was developed based on the quadrilateral area coordinate system (QAC-II) for plane elements (ACATF). (44) Mesh of elastic foundation plate is generated with arbitrary quadrilateral elements,[www.] which is described according to theories of both plane problem and bending problem. (45) Objective To observe and study the distribution and histological feature of the fascicular groups to deltoid muscle in axillary nerve at the level of quadrilateral zone. (46) Treat the well face as internal boundary section the region with quadrilateral grid. (47) The feasibility of area coordinate quadrilateral thin shell element is elaborated, which improve analysis precision and efficiency of sheet metal forming. And the detail formulation is evolved. (48) Bilinear quadrilateral method was used to subdivide the spirally water wall and fin. (49) Paving method has received acceptance , which generates all - quadrilateral meshes in an arbitrary 2 - D region. (50) The flapping mechanism adopts a parallel quadrilateral connecting rod mechanism to lead the tail fin of the robotic fish arranged on a tail fin frame to make periodic translational motion. (51) The Quadrilateral Area Coordinate Method ( QACM ) is a powerful new tool for developing 2 - D element models. (52) Based on geometrical nonlinear finite element theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.